Polarimetry of anisotropic surface layer on glass
DOI:
https://doi.org/10.17721/1812-5409.2020/4.13Анотація
Investigating the Stokes vector of light reflected from the surface of the optical glass, the presence of an anisotropic surface layer was established. The phase difference between radiation p- and s-components is revealed, which varies depending on the angle of incidence. This shows a weak anisotropy. Assuming that the anisotropic layer has an increased refractive index due to its chemical-mechanical treatment, it can be considered as some near-surface weakly guiding gradient burried waveguide. The possibility of coming radiation into such a planar waveguide using a coupling total reflection prism was investigated. The inspection showed a violation of the total internal reflection, unequal for p- and s-polarizations, which confirms the presence of the subsurface layer and its anisotropy. The absorption of radiation, which could be compared with the excitation of modes, is small. This is due to the properties of the prism material. Also, higher order modes are absorbed better. There is no significant angular dependence of the polarization degree of the output beam; however, it is higher in the case of s-polarization.
Key words: polarimetry, inhomogeneity, surface layer, glass.
Pages of the article in the issue: 95 - 98
Language of the article: Ukrainian
Посилання
NOVIKOV, A.A., et. al. (2009) Ellipsometry of inhomogeneous surface layers of anisotropic optical elements. Izvestiia vysshikh uchebnykh zavedenii. Priborostroenie. vol. 1, pp. 62-68 (in Russian).
KHRAMTSOVSKY, I.A., et. al. (1988) Optical properties changes of the surface layer during ion-plasma sputtering of quartz glass. Optics and spectroscopy. vol. 65, iss. 1, pp. 141-145 (in Russian).
GORLYAK A.N., et. al. (2013) Optical characteristics definition of optical technology surface elements for their optical connections. Sci. Tech. J. Inf. Technol. Mech. Opt., iss. 5(87), pp. 62-66 (in Russian).
GORLYAK A.N., et. al. (2004) Investigation of disturbed layers of polished optical surface and stresses in adhesive and glueless joints of optical elements by the method of ellipsometry. Sci. Tech. J. Inf. Technol. Mech. Opt. vol. 4, iss. 5, pp. 30-34 (in Russian).
MAKARENKO O.V., et. al. (2019) Ellipsometric diagnostics of a transient surface layer in optical glass. Ukr. J. Phys. vol. 64, iss, 5, pp. 442-447.
Завантаження
Номер
Розділ
Ліцензія
Автори, роботи яких публікуються у цьому журналі, погоджуються з такими умовами:
- Автори зберігають авторські права та надають журналу право на першу публікацію роботи, яка одночасно ліцензується згідно із Creative Commons Attribution License, тобто надається дозвіл іншим ділитися роботою з визнанням авторства роботи та першої публікації в цьому журналі.
- Автори можуть укладати окремі додаткові угоди щодо невиключного розповсюдження опублікованої журналом версії роботи (наприклад, розмістити її у репозитарії наукової установи чи опублікувати у книзі) з підтвердженням її початкової публікації у цьому журналі.
- Дозволяється та заохочується розміщення своїх робіт в мережі Інтернет авторами (наприклад, у репозитаріях наукових установ або на особистих веб-сторінках) до та під час процесу подання, оскільки це може призвести до продуктивного обміну, а також до більш ранніх цитувань опублікованої роботи та їх більшої кількості (див. The Effect of Open Access).
