Stokes-polarimetry of ultrathin Au and Sn island films
DOI:
https://doi.org/10.17721/1812-5409.2018/4.18Abstract
The optical properties of ultrathin Au and Sn islet films, obtained by the methods of magnetron sputtering and thermal evaporation, respectively, are considered in this paper. By measuring the Stokes vector of the beam reflected from the samples, polarized and depolarized radiation components were separated. The conditions of the polarization degree dependence on the surface structure for a series of islet films with different morphologies are analyzed. To determine the morphological structure of the metal layer, methods of atomic force microscopy and resistivity measurement were also employed. The parameters of discontinuous film, obtained by optical and non-optical methods, are compared. It is established that with an increase in the angle of radiation incidence onto the samples, the polarization degree of the reflected beam decreases. Such behavior can be explained by the Mie theory of light scattering by particles. The magnitude of depolarizing action of the samples also depends on the morphology of their surface, correlating with the number of inequalities on it. The applied method of Stokes polarimetry, thus, allows one to obtain additional information on the structure of the surface, which is its advantage.
Key words: polarimetry, Stokes vector, island film, depolarization, gold, tin.
Pages of the article in the issue: 122-129
Language of the article: Ukrainian
References
MCPEAK, K. M. et al. (2015) Plasmonic Films Can Easily Be Better: Rules and Recipes. ACS Photonics. 2, P. 326–333.
JELLISON, G. E. (1999) Ellipsometry. In: Encyclopedia of Spectroscopy and Spectrometry. San Diego: Academic Press. P. 402-411.
TAKEUCHI, K., and ADACHI, S. (2009) Optical properties of β-Sn films. Journal of Applied Physics, 105(7), 73520.
ZORC, H., LONĈARIĆ, M., & SANCHOPARRAMON, J. (2011) Use of gold island films in design of reflectors with high luminosity. Applied Optics, 50(9), C364.
LAHAV, M., VASKEVICH, A., and RUBINSTEIN, I. (2004) Biological Sensing Using Transmission Surface Plasmon Resonance Spectroscopy. Langmuir, 20(18), 7365–7367.
MOSIER-BOSS, P. A., and LIEBERMAN, S. H. (1999). Comparison of Three Methods to Improve Adherence of Thin Gold Films to Glass Substrates and Their Effect on the SERS Response. Applied Spectroscopy, 53(7), 862-873.
PARTRIDGE, J. G. et al. (2008) Nanostructured SnO2 films prepared from evaporated Sn and their application as gas sensors. Nanotechnology, 19(12), 125504.
YAMPOLSKIY, A. L., MAKARENKO, O. V., POPERENKO, L. V., and LYSIUK, V. O. (2018) Ellipsometry of hybrid noble metal-dielectric nanostructures. Semiconductor Physics, Quantum Electronics and Optoelectronics. 21, №4, p. 412.
VALAKH, M. YA. et al. (2014) Effective nanostructured SERS substrates for the diagnosis of ultra-small amounts of a substance. In: Nanosize systems and nanomaterials: researches in Ukraine. Ed. A. G. Naumovets., NAS of Ukraine, Kyiv: Academperiodyka. p. 283.
AYUPOVA, A. H., GARAFUTDINOV R. R., CHEMERIS A. V., and TALIPOV R. F. (2012) The influence of chemical treatment on the glass surface topography during its preparation for the immobilization of biomolecules. Bulletin of the Bashkir University. 17, №4, p. 1677. (in Russian)
OLMON, R. L. et al. (2012). Optical dielectric function of gold. Physical Review B, 86(23), 235147.
MAKARENKO, O. V., POPERENKO, L. V., ZAVALISTYI, O. I, & YAMPOLSKIY, A. L. (2019) Ellipsometric diagnostics of a transient surface layer in optical glass. Ukrainian Journal of Physics, 64(5), 442.
TOPORETS, A. S. (1988) Optics of rough surface. USSR, Leningrad: Engineering, 190 p.
MAKSIMENKO, V. V., ZAGAYNOV, V. A., SMOLIYANSKIY, A. S., and AGRANOVSKI, I. E. (2017) Effective dielectric permeability of island metal films: Light scattering and absorption. Thin Solid Films, 621, 84–90.
GERMER, T. A., et al. (2017) Polarized optical scattering by inhomogeneities and surface roughness in an anisotropic thin film. Journal of the Optical Society of America A, 34(11), 1974.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
