Numerical simulation of the thermo-stress-strain state of elements under 3D printing
DOI:
https://doi.org/10.17721/1812-5409.2021/4.11Ключові слова:
адитивні технології, FDM 3D друк, математичне моделювання, термо- напружено-деформований станАнотація
The paper is devoted to the assessment of the thermo-stress-strain state of elements of structures obtained by 3D printing using FDM (Fusing Deposition Modeling) technology. Three stages of solving this problem are considered: (1) - mathematical formulation of the problem, that includes universal balance relations, constitutive equations of mechanical behavior of the material and is based on the model of growing bodies; (2) the technique of finite-element solution with increasing mesh due to the addition of new elements; (3) - study of a specific problem of growing plate-like element by polymer PLA (polylactide) with temperature-dependent physical properties. Options of deposed layers of different thickness are considered. The residual stress-strain state of the body has a two-scale structure, which reflects the change of state characteristics in the scale of body size, as well as the thickness of the layers. As the thickness of the layers increases, the average values of the residual stresses decrease, but the amplitude of the stress fluctuations along the thickness of the layer slightly increase.
Pages of the article in the issue: 70 - 75
Language of the article: Ukrainian
Посилання
ANNUAL WORLDWIDE PROGRESS REPORT. (2016) Additive Manufacturing and 3D Printing State of the Industry. Wohler’s Associates, Inc.
TURNER, B.N., STRONG, R. and GOLD, S.A. (2014) A review of melt extrusion additive manufacturing processes: I. Process design and modeling. Rapid Prototyping Journal, vol. 20, no 3, pp. 192–204.
WONG, K. and HERNANDEZ, A. (2012), A Review of Additive Manufacturing, International Scholarly Research Network (ISRN). Mechanical Engineering. Available from: https://doi.org/10.5402/2012/208760.
ARUTYUNYAN, N.KH., DROZDOV, A.D. and NAUMOV, V.E. (1987) Mekhanika rastushhikh vyazkouprugoplasticheskikh tel, M.: Nauka, 472 р.
SENCHENKOV, I.K. (2005), Termomekhanicheskaya model` rastusсhikh czilindricheskikh tel iz fizicheski nelinejny`kh materialov, Prikl. Mekhanika. 41(9), pp. 118–126.
MOTOVILOVECZ, I.A. and KOZLOV, V.I. (1987), «Mekhanika svyazanny`kh polej v materialakh i elementakh konstrukczij v 5-ti t.; T.1. Termouprugost`», Kiev Nauk. Dumka, 264 р.
SENCHENKOV, I.K., CHERVINKO, O.P. AND BANYAS, M.V. (2013) Modelling thermomechsnical process in growing viscoplastic bodies with accounting of microstructural transformations. Encyclopedia of Thermal stresses, F. Hetnarski (ed). Springer Sci-Disness Media Pordrecht. 6, p. 3147-3157.
Ryabtsev I.A. Teoriya i praktika naplavochnykh rabot / I.A. Ryabtsev, I.K. Senchenkov. – K.: Ekotekhnologíya, 2013. – 400 p.
RYABTSEV, I.A., SENCHENKOV, I.K. and TURYK, E.V. (2015) Naplavka. materialy, tekhnologii, matematicheskoye modelirovaniye. Glivitse: Izd-vo Silezskogo politekhnicheskogo instituta. 44 -100, 590 p.
BATTEGAZZORE, D., BOCCHINI, S. and Frache A., (2011), «Crystallization kinetics of poly(lactic acid)-talc composites», eXPRESS Polymer Letters, vol.5, no.10, pp. 849–858.
Завантаження
Опубліковано
Номер
Розділ
Ліцензія
Автори, роботи яких публікуються у цьому журналі, погоджуються з такими умовами:
- Автори зберігають авторські права та надають журналу право на першу публікацію роботи, яка одночасно ліцензується згідно із Creative Commons Attribution License, тобто надається дозвіл іншим ділитися роботою з визнанням авторства роботи та першої публікації в цьому журналі.
- Автори можуть укладати окремі додаткові угоди щодо невиключного розповсюдження опублікованої журналом версії роботи (наприклад, розмістити її у репозитарії наукової установи чи опублікувати у книзі) з підтвердженням її початкової публікації у цьому журналі.
- Дозволяється та заохочується розміщення своїх робіт в мережі Інтернет авторами (наприклад, у репозитаріях наукових установ або на особистих веб-сторінках) до та під час процесу подання, оскільки це може призвести до продуктивного обміну, а також до більш ранніх цитувань опублікованої роботи та їх більшої кількості (див. The Effect of Open Access).
