Cutting-out method in the problem of longitudinal shear of anisotropic half-space with a crack
DOI:
https://doi.org/10.17721/1812-5409.2019/1.4Abstract
The previously developed direct cutting-out method in application to isotropic materials, in particular to bodies with thin inhomogeneities in the form of cracks and thin deformable inclusions is extended to the case of taking into account the possible anisotropy of the material. The basis of the method is to modulate the original problem of determining the stress state of a limited body with thin inclusions by means of a technically simpler to solve problem of elastic equilibrium of an infinite space with a slightly increased number of thin inhomogeneities, which in turn form the boundaries of the investigated body. By loaded cracks we model the boundary conditions of the first kind, and by absolutely rigid inclusions embedded into a matrix with a certain tension – the boundary conditions of the second kind. Using the method of the jump functions and the interaction conditions of a matrix with inclusion, the problem is reduced to a system of singular integral equations, the solution of which is carried out using the method of collocations. Approbation of the developed approach is carried out on the problem of elastic equilibrium of anisotropic (orthotropic in direction of shear) half-space with a symmetrically loaded very flexible inclusion (a crack) at jammed half-space boundary. The influence of inhomogeneity orientation and the half-space material on the generalized stress intensity factors were studied.
Key words: antiplane shear, anisotropy, cracks, thin elastic inclusions, cutting-out method.
Pages of the article in the issue: 24-27
Language of the article: Ukrainian
References
SULYM, G. (2007) Osnovy matematychnoyi teoriyi termopruzhnoyi rivnovahy deformivnykh tverdykh til z tonkymy vklyuchennyamy L'viv: Doslidno-vydavnychyy tsentr NTSh.
VASIL’EV, K. & SULYM, G. (2006) Pryamyy metod vyrizuvannya dlya modelyuvannya napruzheno-deformovanoho stanu izotropnykh sharuvatykh seredovyshch z tonkymy neodnoridnostyamy za antyploskoho deformuvannya. Mashynoznavstvo. 11–12. p. 10-17.
VASIL’EV, К. & SULYM, G. (2012) Application of the method of direct cuttingout to the solution of the problem of longitudinal shear of a wedge with thin heterogeneities of arbitrary orientation. J. Math. Sci. 180 (2). p 122-134.
SULYM, G. & SHEVCHUK, S. (1999) Antiplane problem for anisotropic layered media with thin elastic inclusions under concentrated forces and screw dislocations. J. Theor. and Appl. Mech. 37 (1). p. 47-63.
Downloads
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
