Basic Characteristics and Industrial Application of Styrene Copolymer-Based Thermoplastic Elastomers (Overview)

Authors

  • V. V. Talanyuk E.О. Paton Electric Welding Institute of the National Аcademy of Sciences of Ukraine
  • A. O. Shadrin E.О. Paton Electric Welding Institute of the National Аcademy of Sciences of Ukraine https://orcid.org/0000-0002-2777-0852
  • M. V. Yurzhenko E.О. Paton Electric Welding Institute of the National Аcademy of Sciences of Ukraine

DOI:

https://doi.org/10.17721/1812-5409.2019/2.13

Abstract

Thermoplastic elastomers (TPEs) have elastic properties that are similar to rubber but capable of melting and all thermoplastic properties. Block copolymers are also widely used, in which there are links of different polymers in the structure of their macromolecules. So styrene-ethylene-butylene- styrene (SEBS) belongs to the second generation, the products of which have high physical and mechanical properties, and biocompatibility allows it to be used in the medical field. The main characteristics and analysis of advantages of TPE on the example of SBSS in comparison with traditional materials are presented in the paper.

Key words: thermoplastic elastomers, SEBS, structure, properties, application.

Pages of the article in the issue: 98 - 103

Language of the article: Ukrainian

References

Plastic & Thermoplastic Elastomer Materials. Minnesota Rubber and QMR Plastics. https://mnrubber.com/Design_Guide/3-6.html

What is TPE? (2017), P. 112-117.

http://www.altinelpvc.com/altinelpvc/media/pdf/c onta_teknik_bilgiler_ru.pdf

Кraton (SEBS and SEBS ОE) (2016). http://kraton.com/products/КRАTОN_G.php

Injection Molding Handbook T. Оsswald, L.S. Turng, P. Gramann. Hanser ISBN-10: 3-446- 40781-2. 2010.

MАNSОN J.А., SPERLING L.H. Polymer blends and composites. Plenum Press, New York 1976. P.119-136.

CОSTА F.R., DUTTА N.К., CHОUDHURY N.R., BHОWMICК А.К. (2008) Thermoplastic elastomers Current topics in elastomers research Ed. by А.К. Bhowmick. CRC Press (Taylor & Francis Group), P. 101-164.

FАNG L., WEI M., SHАNG Y., JIMENEZ L., КАZMER D., BАRRY C., MEАD J. (2016) Surface morphology alignment of block copolymers induced by injection molding Polymer. V. 50. P. 5837-5845.

HОLDEN G. (2014) Elastomers, thermoplastic. Encyclopedia of polymer science and technology. 12 volumes. 3rd edition. Ed. by. H.F. Mark. V. 6. John Wiley & Sons. P. 63-88.

MАSUКО N. (2016) New Styrenic Block Copolymers and Аpplications http://www. petrochemconclave.com/presentation/2016/Mr.N. Masuko. pdf.

MАNАMIDE А., MОRIGUCHI N., GRUENDCEN V., КUVАHАRА S. (2013) New bondable styrenic block copolymer elastomers / TPE magazine.

КELCH R. А New Family of HF-Weldable Polyolefin Films https://www.mddionline.com/ new-family-hf-weldable-polyolefin-films.

АMАNАT N., JАMES N.L., MCКENZIE D.R. (2010) Welding methods for joining thermoplastic polymers for the hermetic enclosure of medical devices. Medical Enjineering and physics. Vol. 32, P. 600-699.

Downloads

How to Cite

Talanyuk, V. V., Shadrin, A. O., & Yurzhenko, M. V. (2019). Basic Characteristics and Industrial Application of Styrene Copolymer-Based Thermoplastic Elastomers (Overview). Bulletin of Taras Shevchenko National University of Kyiv. Physical and Mathematical Sciences, (2), 98–103. https://doi.org/10.17721/1812-5409.2019/2.13

Issue

No. 2 (2019)

Section

Modern Physics

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).