Investigation of the stress-strain state of a cylinder with microstructural transformations under pulse loading
DOI:
https://doi.org/10.17721/1812-5409.2023/2.32Keywords:
pulse loading, model of flow, microstructural transformationsAbstract
Axisymmetric dynamic problem of thermomechanical loading of a steel cylinder is considered. Volume strain caused by the microstructural transformations of the martensitic type under cooling solids as well as into consideration and dependence inelastic characteristics of material for multiphase state are taken. The thermomechanical nonlinear behavior of an isotropic material is described by unified flow model generalized for the case of multiphase material state. The problem is solved numerically by the implicit step-by-step time integration method, by the iterative method and by the finite element method. The investigation of the stress-strain state of an inelastic material with regard for the dependence of parameters of the flow model on the phase composition of a material is carried out by using of numerical simulation. We established that microstructural transformations significantly reduce residual inelastic strain and promote the appearance of compressive stresses. The results obtained in the work can be used in calculations of parameters of surface hardening technologies.
Pages of the article in the issue: 176 - 179
Language of the article: Ukrainian
References
YILBAS, B. S., SHUJA, S. Z., ARIF, A., GONDAL, M. A. (2003). Laser-shock processing of steels. J. Mater. Process. Technol. [Online] 135. p. 6–17. Available from: https://doi.org/10.1016/S0924-0136(02)00813-0
SENCHENKOV, I. K., OKSENCHUK, N. D. (2013) Modeling of a nonisothermal flow with regard for the dependence of plastic properties on the microstructure of a material. J. Math. Sci. [Online] 190 (6). р. 796-803. Available from: https://doi.org/10.1007/s10958-013-1289-6
LEBLOND, J. B., MOTTET, G., DEVAUX, J. C. (1986). A theoretical and numerical approach to the plastic behavior of steel during phase transformation. – I. Derivation of general relations. J. Mech. Phys. Solids. [Online] 34 (4). p. 395–409. Available from: https://doi.org/10.1016/0022-5096(86)90009-8
ZHUK, Y. A., SENCHENKOV, I. K., KOZLOV, V. I., TABIEVA, G. A. (2001). Axisymmetric dynamic problem of coupled thermoviscoplasticity. International Applied Mechanics. [Online] 37 (10). p. 1311–1317. Available from: https://doi.org/10.1023/A:1013976219144
Downloads
Published
Issue
Section
License
Copyright (c) 2023 N. D. Yakovenko, S. M. Yakymenko
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
